FDMR 180
Brandklep
FDMR 180 - Een brandklep is een afsluiter in het kanalensysteem van een luchtbehandelingsinstallatie, die de verspreiding van brand en verbrandingsproducten van het ene brandcompartiment naar de andere voorkomt door het luchtkanaal af te sluiten.
Eigenschappen
•brandkleppen van ø 200 tot ø 800 mm
•CE gecertificeerd volgens EN 15650
•getest volgens EN 1366-2
•geclassificeerd naar EN 13501-3+A1
•brandklassen EI 180 S - 500 Pa
•luchtdichtheid behuizing klasse ATC 3 volgens EN 1751
•lekkage klepblad klasse 3 volgens EN 1751
•corrosieklasse volgens EN 15650
•cyclus klasse C 10 000 volgens EN 15650
•klepaandrijving mechanisch of door middel van servomotor
•Maximale luchtsnelheid (geopende klep) 12 m/s en een drukverschil van 1200 Pa
Specificaties
Fire dampers are shutters in ducts of air-conditioning devices that prevent spreading the fire and combustion products from one fire segment to the other one by means of closing the duct in the points of fire separating constructions. The damper blade automatically closes the air duct using a shutting spring or an actuating mechanism of back spring. The shutting spring is activated by pressing the start button or by the impulse from the thermal fuse. The back spring of the actuating mechanism is started when the thermoelectric starting mechanism BAT is activated, when the reset button on BAT is pressed or when the power supply to the actuating mechanism is stopped. After closing the blade, the damper is sealed with a silicon packing against smoke penetration. The damper can be delivered with a seal without silicone at the customer''s wish. At the same time, the damper blade is embedded in a material which enlarges its volume due to increasing temperature and hermetically seals the air duct. The dampers have one inspection hole, as the shutting device and the inspection hole can be set to the most advantageous position with respect to operation and handling of the control device by turning the damper a little in case of the spiro model of the dampers.