RDTM
Registre de regulation Multi Lames étanche
RDTM – Le register de régulation multi lames contrôle le flux d’air ou scelle hermétiquement les conduits rectangulaires des systèmes de ventilation en ajustant ses sections transversales efficaces avec des pales contrarotatives. Les lames rigides en tôle d’acier sont équipées de joints EN EPDM.
Propriétés
•Pour regulation et fermeture des reseaux de ventilation.
•Très faible couple pour faire fonctionner le registre
•Manuel ou Motorisé.
•Plage standard de 200 × 200 mm à 2 000 × 2 000 mm.
•Etanchéité acc. EN 1751: - étanchéité de l’enveloppe: class ATC 3 - étachéité de la lame (fermée): class 3
•Acier galvanisé ou acier Inoxidable.
•Minimisation de la perte de charge et du bruit: - deux tailles de lames. - pales avec un profil aérodinamique - bord d’attaque du boîtier coupé à l’angle le cas échéant.
•Comprend une bride de raccordement pour conduit.
•Sans silicone, sans halogène, sans plomb
•Classe de stabilisation UV et de suppression de l’inflammabilité V-0
•Enveloppe, pales et réaction mécanique au feu classe A1
•Proposé également en version pour atmosphères potentiellement explosives
Spécifications
Multi blade tight regulation dampers RDTM (hereinafter referred also shortely as the '"dampers'") are intended to be used in buildings – in heating, ventilation and air-conditioning (HVAC) systems. Controlled changes of the damper effective cross-section allow to adjust the air flow rate. The damper also allows to cut the air flow completely whenever requested, forming an air-tight barrier.The dampers consist of a rectangular steel body (frame), set of steel counter-running blades equipped with EPDM gaskets and closed from the both sides by sealing end-cups from a composite material based on polyamide with suppressed flammability V-0 in accordance with UL 94 (halogen-free), blade shaft from steel with composite plain bearings (or stainless-steel plain bearings, on demand), steel rod mechanism, and from a manual control, or from actuator control (with actuator), or the dumper is just ready for actuator mounting (without actuator), respectively.The dampers are characterized by:• effort-less, smooth, silent running• rigid blades with good aerodynamics• two blade sizes to guarantee optimum filling of the cross-section• silicone-free design• wide application range