SEDM-L
Clapet d’évacuation de la fumée « multi-lames » de plusieurs tranches d’incendie
Propriétés
•Clapets rectangulaires de 200 × 430 à 1200 × 2030 mm, combinaison est possible de plusieurs volets dans un assemblage
•Certification CE conformément à EN 12 101-8
•Testé conformément à EN 1366-10
•Classé conformément à EN 13501-4
•Résistance au feu jusqu’à EI 120 S, activation AA/MA, HOT 400/30
•Cyclage Cmod selon EN 15650
•Étanchéité selon EN 1751 à travers le corps, classe ATC 3, et via le volet de clapet, classe 3
•Commande des clapets au moyen de servomoteurs
•Pour systèmes avec une vitesse maximale de 15 m/s, une dépression jusqu’à -1 000 Pa ou une surpression jusqu’à 500 Pa
Spécifications
Smoke and heat extraction dampers - multi are closures in the pipework of smoke extraction devices. In the event of a fire, the smoke and heat removal system open the dampers in the affected section, therefore enabling the extraction fans to remove combustion products and heat from the endangered areas.The damper slat is controlled by an actuator.The damper is fire resistant and is designed for systems with automatic or manual activation.Smoke dampers are intended for use in spaces with multiple fire compartments, which can be connected by a smoke extraction pipe tested according to EN 1366-8 or can be installed in the construction of the fire compartment.The dampers can be supplied with flange(s) or without flange(s), with cover grille(s).